Changes to Step #3
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
+ | [title] Disassembly |
---|---|
+ | [* red] Unload the filament and allow the hot end to cool. Turn off the printer and remove the power plug. |
+ | [* orange] Protect the printing surface and use a tray to catch small components that might fall during the disassembly. |
+ | [* green] Remove the m3x40 screw securing the Rambo/Einsy cover and disconnect all connectors from the extruder cable. |
+ | [* blue] Cut the zip ties and remove the screws clampling the extruder cable and remove the 3mm nylon filament. Completely unwind the cables. |
+ | [* icon_caution] Be careful to not cut the cables while cutting the zip ties. |