Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Min Temp Error for Hotend (1/2) | |
| [* black] Turn the printer off and then on. | |
| - | [* |
| + | [* yellow] Preheat the heated bed and extruder for PLA temperature through the ''preheat'' menu of your printer. |
| [* black] Unplug the hotend thermistor wires. | |
| [* orange] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* green] Rambo Einsy hotend thermistor connector (MK3 and MK3S). |
Image 1
Old Version
New Version