Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Heated Bed (1/2)
[* black] Turn the printer off and then on.
-[* black] Preheat the heated bed and extruder for PLA temperature through the Preheat menu of your printer.
+[* yellow] Preheat the heated bed and extruder for PLA temperature through the ''preheat'' menu of your printer.
[* black] Unplug the heated bed thermistor wires.
[* orange] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* green] Rambo Einsy heated bed thermistor connector (MK3 and MK3S).

Image 1

Old Version

New Version