Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Preparing a cable to test thermal runaway | |
| [* icon_note] To test runaway protection (or MAXTEMP protection) you need to shortcut the thermistor pins on the Rambo board. | |
| [* violet] You will need a Female to Female Dupon cable to shortcut the thermistor connector. | |
| - | [* violet] Alternatively you can cut an old thermistor and connect both wires together (those that are connected on the connector side). |
| + | [* black] Alternatively you can cut an old thermistor and connect both wires together (those that are connected on the connector side). |
| + | [* green] Here an example on how to connect the Dupon cable for the later steps. Note the position is only for the example. |
Image 1
Old Version
New Version
Image 2
No previous image
Added