Changes to Step #12
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Preheat Error for Hotend (1/2) | |
| [* black] Turn the printer off and then on. | |
| + | [* black] Locate the hotend heater connector on your Rambo board |
| + | [* orange] Rambo Mini hotend heater connector (MK2, MK2S, MK2.5 and MK2.5S). |
| + | [* green] Rambo Einsy hotend heater connector (MK3 and MK3S). |
| [* yellow] Preheat the heated bed and extruder for PLA temperature through the ''preheat'' menu of your printer. |
Image 2
No previous image
Added
Image 3
No previous image
Added