Skip to main content

Changes to Step #12

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

+[title] Preheat Error for Hotend (1/2)
+[* black] Turn the printer off and then on.
+[* black] Locate the hotend heater connector on your Rambo board:
+ [* orange] Rambo Mini hotend heater connector (MK2, MK2S, MK2.5 and MK2.5S).
+ [* green] Rambo Einsy hotend heater connector (MK3 and MK3S).
+[* yellow] Preheat the heated bed and extruder for PLA temperature through the ''Preheat'' menu of your printer.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added