Changes to Step #5

Edit by Ferenc Harmati —

Pending approval

Before
After
Unchanged

Step Lines

[title] MK2(S) or MK2.5(S) step
[* 10] This step is for the ***MK2(S) or MK2.5(S) only***.
[* 1] For the Prusa ***MK3(S) with a silver PSU*** go to the next step.
[* 1] For the Prusa MK3(S) with a ***black PSU*** go to [guide|50|step 7|stepid=624].
[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame. Space them evenly as shown in the image.
-[* 1] Go to [guide|50|step 8|stepid=626].
+[* 1] Go to [guide|50|step 8|stepid=627].