1. Hardware Assembly Step #5 History

Changes to Step #5

Edit by Florian Daeubler — Jun 13, 2021

-	[title] WiFi Antenna Installation
+	[title] WiFi Antenna Cable Installation
	[* 9] *Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*
	[* 10] The connection between antenna and the board is designed at an angle to optimize the wire position of the antenna which avoids unnecessary strain on the wire and board connection.
	[* 5] Insert the *hex nut end* of the *antenna wire* into the its pocket on the case.
	[* 3] *Secure the wire to the case* by screwing the included *hex nut* to the outside of the case until it is secured firmly.
	[* 4] Make sure to use the *locking washer* between the case and the hex nut.

-	[title] WiFi Antenna Installation
+	[title] WiFi Antenna Cable Installation
	[* 9] *Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*
	[* 10] The connection between antenna and the board is designed at an angle to optimize the wire position of the antenna which avoids unnecessary strain on the wire and board connection.
	[* 5] Insert the *hex nut end* of the *antenna wire* into the its pocket on the case.
	[* 3] *Secure the wire to the case* by screwing the included *hex nut* to the outside of the case until it is secured firmly.
	[* 4] Make sure to use the *locking washer* between the case and the hex nut.