Changes to Step #9
Edit by Florian Daeubler —
Edit approved by Florian Daeubler
- Before
- After
- Unchanged
Step Lines
| [title] Case Mounting I | |
| - | [* 1] Insert wisdom here. |
| + | [* 5] Insert a ***M5x8mm*** screw into the pocket on the top of the case. We will use this screw to secure the case to the Z extrusion on the frame. |
| + | [* 3] ***Loosely*** thread a ***T-nut*** onto the screw from the outside of the case. Do not tighten the T-nut to the case, as we will slide the T-nut into the Z extrusion on the frame. |