Changes to Step #11

Edit by Florian Daeubler —

Edit approved by Florian Daeubler

Before
After
Unchanged

Step Lines

[title] Case Mounting III
-[* 5] Insert a M5x8mm screw in the pocket where the case sits on the back extrusion of the XY frame.
-[* 3] Insert a T-nut in the top slot of the extrusion and attach it to the screw we have just inserted. Do not tighten the screw yet.
+[* 5] Insert a ***M5x8mm*** screw in the pocket where the case sits on the back extrusion of the XY frame.
+[* 3] Insert a t-nut in the top slot of the extrusion and attach it to the screw we have just inserted. Do not tighten the screw yet.
[* 8] Tighten both screws that attach the case to the frame firmly.
[* 9] Secure the case parallel to the Z extrusion.