1. Hardware Assembly Step #3 History

Changes to Step #3

Edit by Florian Daeubler — Jun 13, 2021

	[title] Antenna Disassembly
-	[* 9] Be careful when handling the ~~*~~antenna~~~~, especially the connection with the board is very sensitive and you should ~~~~avoid putting any strain on it*.
+	[* 9] *Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*
	[* 5] *Unscrew* the *antenna* carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
	[* 3] Remove the *golden nut and washer* from the thread as well and keep them in a place where you will find them again. They will be used to secure the antenna to the board case in a later step.

	[title] Antenna Disassembly
-	[* 9] Be careful when handling the ~~*~~antenna~~~~, especially the connection with the board is very sensitive and you should ~~~~avoid putting any strain on it*.
+	[* 9] *Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*
	[* 5] *Unscrew* the *antenna* carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
	[* 3] Remove the *golden nut and washer* from the thread as well and keep them in a place where you will find them again. They will be used to secure the antenna to the board case in a later step.