1. Hardware Assembly Step #3 History

Changes to Step #3

Edit by Florian Daeubler — Jun 14, 2021

	[title] Antenna Disassembly - WiFi Only
	[* 9] *If you have the Ethernet Version of the Duet 3 Mini 5+ you can skip this step.*
	[* 9] *Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*
-	[* 5] ~~*~~Unscrew~~~~ the ~~~~antenna~~*~~ carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
+	[* 5] Unscrew the antenna carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
	[* 3] Remove the *nut, the washer* and the *locking washer* from the thread as well and keep them in a place where you will find them again. They will be used to secure the antenna to the board case in a later step.

	[title] Antenna Disassembly - WiFi Only
	[* 9] *If you have the Ethernet Version of the Duet 3 Mini 5+ you can skip this step.*
	[* 9] *Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*
-	[* 5] ~~*~~Unscrew~~~~ the ~~~~antenna~~*~~ carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
+	[* 5] Unscrew the antenna carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
	[* 3] Remove the *nut, the washer* and the *locking washer* from the thread as well and keep them in a place where you will find them again. They will be used to secure the antenna to the board case in a later step.