Changes to Step #3

Edit by Florian Daeubler —

Edit approved by Florian Daeubler

Before
After
Unchanged

Step Lines

-[title] Antenna Disassembly - WiFi Only
+[title] WiFi only - Antenna Disassembly
[* 9] ***If you have the Ethernet Version of the Duet 3 Mini 5+ you can skip this step.***
[* 9] ***Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.***
[* 5] Unscrew the antenna carefully from the wire and keep it in a place where you will find it again. You can keep the antenna connected to the board.
[* 3] Remove the ***nut***, the ***washer*** and the ***locking washer*** from the thread as well and keep them in a place where you will find them again. They will be used to secure the antenna to the board case in a later step.