Changes to Step #3
Edit by Florian Daeubler —
Edit approved by Florian Daeubler
- Before
- After
- Unchanged
Step Lines
| [title] WiFi only - Antenna Disassembly | |
| [* 9] ***If you have the Ethernet Version of the Duet 3 Mini 5+ you can skip this step.*** | |
| [* 9] ***Be careful when handling the antenna, especially the connection with the board is very sensitive and you should avoid putting any strain on it.*** | |
| - | [* 5] Unscrew the antenna carefully from the wire and keep it for later use. You can keep the antenna connected to the board. |
| + | [* 5] Unscrew the antenna carefully from the wire and keep it for later use. You can keep the antenna connected to the board if it is already connected. |
| [* 3] Remove the nut, the washer and the locking washer from the thread as well and keep them for later use. |