Changes to Step #13
Edit by Florian Daeubler —
Edit approved by Florian Daeubler
- Before
- After
- Unchanged
Step Lines
| + | [title] Case Mounting IV |
|---|---|
| + | [* 2] ***Re-attach the end caps*** on both the left Z extrusions and the extrusion on the back of the XY-frame. |
| + | [* 5] Insert the Noctua 5V fan that came with your stock MK3. |
| + | [* 3] Attach the Noctua fan and the ***''board_fan_grill''*** to the case with 3x ***M3x14mm*** screws. |
| + | [* 9] Do not over-tighten the screws as this will damage the fan. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added