Changes to Step #13

Edit by Florian Daeubler —

Edit approved by Florian Daeubler

Before
After
Unchanged

Step Lines

[title] Case Mounting IV
[* 5] Insert the Noctua 5V fan that came with your stock MK3.
[* 3] Attach the Noctua fan and the ***''board_fan_grill''*** to the case with 3x ***M3x18mm*** screws.
[* 9] Do not over-tighten the screws as this will damage the fan.
-[* 2] ***Re-attach the end caps*** on both the left Z extrusions and the extrusion on the back of the XY-frame.
+[* 2] Re-attach the end caps on both the left Z extrusions and the extrusion on the back of the XY-frame.