Changes to Step #1

Edit by Florian Daeubler —

Edit approved by Florian Daeubler

Before
After
Unchanged

Step Lines

[title] Preparation
[* 5] Insert 3x ***M3 square nuts*** in ***''duet_cover_back''***.
[* 3] Insert one more ***M3 square nut*** on the inside of the case.
[* 9] Make sure to fully insert the nuts!
-[* 8] Remove both ***printed supports*** from the tabs on ***''duet_cover_lid''***.
+[* 8] Remove both printed supports from the tabs on ***''duet_cover_lid''***.