Changes to Step #14

Edit by Florian Daeubler —

Edit approved by Florian Daeubler

Before
After
Unchanged

Step Lines

[title] PanelDue Installation
-[* 1] Insert the ***PanelDue*** into ***''cover_paneldue_5in''***, facing down on the table.
+[* 1] Insert the PanelDue into ***''cover_paneldue_5in''***, facing down on the table.
[* 5] Add ***''lcd_support_left''*** and ***''lcd_support_right''***.
- [* 8] Attach the ***PanelDue*** and its ***supports*** to the case with 4x M3x10mm screws.
+ [* 8] Attach the PanelDue and its supports to the case with 4x M3x10mm screws.
[* 9] Carefully tighten the screws as over-tightening could cause damage to the PanelDue.