Changes to Step #15

Edit by Florian Daeubler —

Edit approved by Florian Daeubler

Before
After
Unchanged

Step Lines

[title] PanelDue Mounting I
-[* 2] ***Remove*** one ***end cap*** on the ***front extrusion*** of the XY-frame.
-[* 5] Insert ***two t-nuts*** in the ***bottom slot*** where we have removed the end cap.
-[* 8] ***Secure the PanelDue*** to the extrusion via the LCD supports with 2x ***M5x10mm*** screws.
+[* 2] Remove one end cap on the front extrusion of the XY-frame.
+[* 5] Insert ***two t-nuts*** in the bottom slot where we have removed the end cap.
+[* 8] Secure the PanelDue to the extrusion via the LCD supports with 2x ***M5x10mm*** screws.