Changes to Step #5
Edit by Austin Vojta —
Edit approved by Austin Vojta
- Before
- After
- Unchanged
Step Lines
| [title] Print extruder calibration cube | |
| [* 1] Set the following print settings: | |
| - | [* 8] Vase mode |
| - | [* 5] Solid layers |
| + | [* 8] Spiral Vase mode (and accept dialog to auto-configure settings accordingly) |
| + | [* 5] Solid layers Top and Bottom: 0 |
| [* 1] Slice and print your cube. |