Pending Edits to 09. Electronics assembly
Step #5 edited: [Step edited]
Edited by Ferenc Harmati (1)
(You don’t have enough reputation to patrol this edit.)
| [title] MK2(S) or MK2.5(S) step | |
| [* 10] This step is for the ***MK2(S) or MK2.5(S) only***. | |
| [* 1] For the Prusa ***MK3(S) with a silver PSU*** go to the next step. | |
| [* 1] For the Prusa MK3(S) with a ***black PSU*** go to [guide|50|step 7|stepid=624]. | |
| [* 8] Install 4x ''cable_clip_vertical'' on the back of the frame. Space them evenly as shown in the image. | |
| - | [* 1] Go to [guide|50|step 8|stepid= |
| + | [* 1] Go to [guide|50|step 8|stepid=627]. |