Skip to main content

Revision to Bear FAQ

Grégoire Saunier

In our [|Github] you will always find a "src" or "source" folder which contains the source files of our projects (generally Fusion 360 files). We are also sharing STEP files for interoperability between CAD software.
+== What pulley and idler size I should use? ==
+* Pulley on the motor size is 16T for both X and Y axis
+* Idler on tensioning side is 20T for both X and Y axis

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes