Skip to main content
Help

Revision to Bear FAQ

Grégoire Saunier

[image|919]
-* If the length is '''311 mm''' long (±1mm) you have the MK2(S) or MK2.5(S) Bear 2.0 frame.
-* If the length is '''331 mm''' long (±1mm) you have the MK3(S) Bear 2.0 frame which is the same frame as Bear 2.1 MK2(S), MK2.5(S) and MK3(S).
-
-The MK2(S) or MK2.5(S) Bear 2.0 frame can be updated to Bear 2.1 without changing the frame. Check the optional parts of the Bear 2.1 frame on GitHub.
-
-Bear 2.1 is a release candidate at the moment and not finalized. This is only because we are validating the hardware with our manufacturer. The RC is very stable and we highly recommend to build this version over the 2.0. Some extra hardware (screws and nuts) is necessary, you can find the [https://github.com/gregsaun/prusa_i3_bear_upgrade/releases/tag/2.1.0-rc1|list in our release note here.]
-
-Link to Bear Upgrade 2.1 files: [https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/dev|github.com/gregsaun/prusa_i3_bear_upgrade/tree/dev]
-
-Link to Bear Upgrade 2.0 files: [https://github.com/gregsaun/prusa_i3_bear_upgrade|github.com/gregsaun/prusa_i3_bear_upgrade]
+* If the length is '''311 mm''' long (±1mm) you have the MK2(S) or MK2.5(S) Bear 2.0 older shorter frame. You will find printed parts and all details in this page: [https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/master/optional_parts/bear_2.0_upgrade_mk2-2s-2.5-2.5s/README.md|optional_parts/bear_2.0_upgrade_mk2-2s-2.5-2.5s/README.md]
+* If the length is '''331 mm''' long (±1mm) you have the MK3(S) Bear 2.0 frame which is the same frame as Bear 2.1 MK2(S), MK2.5(S) and MK3(S). Download the files from this page: [[Topic:Frame]]
== Is the Bear X axis compatible with the original Prusa extruders? ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes