Skip to main content
Help

Revision to Bear FAQ

Grégoire Saunier

There are two workarounds for this issue. Firstly, you can use a Mk3 firmware, pre Mk3S, such as 3.5.1, and perform the xyz calibration. Once calibration is passed, upgrade to the Mk3S firmware of your choice.
-The second method is to mod the firmware to account for the difference in height. If you do not want to mod it yourself, there is a modded version available here
+The second method is to mod the firmware to account for the difference in height. If you do not want to mod it yourself, there is a modded version available here:
https://github.com/vertigo235/Prusa-Firmware/releases/
+
+Any links to third-party software available on this website are provided “as is” without warranty of any kind, either expressed or implied and such software is to be used at your own risk.
+
+Disclaimer: The use of any non-Prusa firmware linked here is provided “as is” without warranty of any kind, either expressed or implied and is to be used at your own risk. We encourage people to use genuine products and firmware from Prusa.
== I have a Mk2S Bear and want to use the Bear x-Ends. Is there a Mk2S version of the Bear Extruder? ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes