Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Download Bear calibration firmware |
|---|---|
| + | [* 10] The Bear extruder is slightly taller in Z than original MK2.5S and MK3S extruder. We then need to temporarily flash a firmware to pass the Z calibration and selftest. After those steps we will flash stock firmware again. |
| + | [* 9] For security reason we recommend to print ONLY with stock firmware. |
| + | [* 1] Select and download the latest Bear calibration firmware here: [https://github.com/gregsaun/Prusa-Firmware/releases/latest|github.com/gregsaun/Prusa-Firmware] : |
| + | [* 1] ***MK3S*** firmware name: ''Bear_Cal_FW_MK3S-EINSy10a.hex'' |
| + | [* 1] ***MK2.5S Rambo 13a*** firmware name: ''Bear_Cal_FW_MK25S-RAMBo13a.zip'' |
| + | [* 1] ***MK2.5S Rambo 10a*** firmware name: ''Bear_Cal_FW_MK25S-RAMBo13a.zip'' |
| + | [* 10] MK2.5S firmware ZIP file contains several languages, select the one you like the most. |
| + | [* 10] If you don't know which Mini-Rambo board you have, please refer to [https://www.prusa3d.com/downloads/firmware/EN-how-to-choose-firmware-MK25.pdf|this document] |
Image 1
No previous image
Added