Changes to Step #8

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[title] Download Bear calibration firmware
-[* 10] The Bear extruder is slightly taller in Z than the original MK2.5S and MK3S extruder. We then need to temporarily flash a firmware to pass the Z calibration and selftest. After those steps we will guide you to flash stock firmware again if you like.
-[* 9] For security reasons, ***we recommend the use of stock firmware from Prusa Research*** for printing.
-[* 1] Select and download the latest Bear calibration firmware here: [https://github.com/bear-lab-3d/Prusa-Firmware/releases/latest|github.com/bear-lab-3d/Prusa-Firmware]:
- [* 1] ***MK3S*** firmware name: ''Bear_Cal_FW123_MK3S-EINSy10a.hex''
- [* 1] ***MK2.5S Rambo 13a*** firmware name: ''Bear_Cal_FW123_MK25S-RAMBo13a.zip''
- [* 1] ***MK2.5S Rambo 10a*** firmware name: ''Bear_Cal_FW123_MK25S-RAMBo10a.zip''
+[title] Download Bear firmware for calibration
+[* 10] To improve reliability and quality we have designed the Bear extruder slightly taller in Z than the original MK2.5S and MK3S extruder. We then need a custom firmware to pass the Z calibration and selftest. After those steps we recommend to flash stock firmware again. However, you have the choice to keep using our custom firmware at your own risks.
+[* 9] We cannot be responsible of damages caused by our custom firmware. However, to reduce as much as possible the risks we kept the changes on the firmware as low as possible and they are documented here: [https://github.com/bear-lab-3d/Prusa-Firmware|github.com/bear-lab-3d/Prusa-Firmware]
+[* 1] Select and download the latest Bear calibration firmware here: [https://github.com/bear-lab-3d/Prusa-Firmware/releases/latest|github.com/bear-lab-3d/Prusa-Firmware/releases/latest]:
+ [* 1] ***MK3S Einsy-Rambo 10a*** firmware name example: ''Bear_Cal_FW123_MK3S-EINSy10a.hex''
+ [* 1] ***MK2.5S Mini-Rambo 13a*** firmware name example: ''Bear_Cal_FW123_MK25S-RAMBo13a.zip''
+ [* 1] ***MK2.5S Mini-Rambo 10a*** firmware name example: ''Bear_Cal_FW123_MK25S-RAMBo10a.zip''
[* 10] MK2.5S firmware comes as a ZIP files containing several languages of the firmware. Extract the ZIP file and choose the language you prefer the most.
[* 10] If you don't know which Mini-Rambo board you have, please refer to [https://www.prusa3d.com/downloads/firmware/EN-how-to-choose-firmware-MK25.pdf|this document]