Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Download Bear firmware for calibration | |
| - | [* 10] For improved reliability and quality the Bear extruder slightly taller than the |
| + | [* 10] For improved reliability and quality the Bear extruder slightly taller than the MK2.5S/MK3S extruder. We provide customized firmware (FW) for the Selftest and Calibration XYZ and Z. After those steps you have the choice to keep using our customized FW or flash stock FW. In either case, you use our FW at your own risk. |
| [* 9] We cannot be responsible for any damage caused by our custom firmware. However, to minimize potential the risks, we limited firmware to allow for the extruder height and document them here: [https://github.com/bear-lab-3d/Prusa-Firmware|github.com/bear-lab-3d/Prusa-Firmware] | |
| [* 1] Select and download the latest Bear calibration firmware here: [https://github.com/bear-lab-3d/Prusa-Firmware/releases/latest|github.com/bear-lab-3d/Prusa-Firmware/releases/latest]: | |
| [* 1] ***MK3S Einsy-Rambo 10a*** firmware name example: ''Bear_Cal_FW123_MK3S-EINSy10a.hex'' | |
| [* 1] ***MK2.5S Mini-Rambo 13a*** firmware name example: ''Bear_Cal_FW123_MK25S-RAMBo13a.zip'' | |
| [* 1] ***MK2.5S Mini-Rambo 10a*** firmware name example: ''Bear_Cal_FW123_MK25S-RAMBo10a.zip'' | |
| [* 10] MK2.5S firmware comes as a ZIP file containing several languages of the firmware. Extract the ZIP file and choose the language you prefer to use. | |
| [* 10] If you don't know which Mini-Rambo board you have, please refer to [https://www.prusa3d.com/downloads/firmware/EN-how-to-choose-firmware-MK25.pdf|this document] |