Changes to Step #14

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Download stock firmware
[* 9] For security reason, ***always use the stock firmware from Prusa Research*** for printing.
[* 1] Select and download the latest Bear calibration firmware here: [https://www.prusa3d.com/drivers/|prusa3d.com/drivers] :
- [* 1] ***MK3S*** firmware name: ''Bear_Cal_FW_MK3S-EINSy10a.hex''
- [* 1] ***MK2.5S Rambo 13a*** firmware name: ''Bear_Cal_FW_MK25S-RAMBo13a.zip''
- [* 1] ***MK2.5S Rambo 10a*** firmware name: ''Bear_Cal_FW_MK25S-RAMBo13a.zip''
+ [* 1] ***MK3S*** firmware name: ''FW_MK3S-EINSy10a.hex''
+ [* 1] ***MK2.5S Rambo 13a*** firmware name: ''FW_MK25S-RAMBo13a.zip''
+ [* 1] ***MK2.5S Rambo 10a*** firmware name: ''FW_MK25S-RAMBo13a.zip''
[* 10] MK2.5S firmware comes as a ZIP files containing several languages of the firmware. Extract the ZIP file and choose the language you prefer the most.
[* 10] If you don't know which Mini-Rambo board you have, please refer to [https://www.prusa3d.com/downloads/firmware/EN-how-to-choose-firmware-MK25.pdf|this document]