Changes to Step #14

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Download stock firmware
-[* 10] We recommend to flash back the stock Prusa firmware. As explained before, the custom firmware is only needed for (XY)Z calibration and selftest. All other features are working like on a stock Prusa printer.
-[* 9] We cannot be responsible of damages caused by our custom firmware. However, to ensure the best possible security, we kept the changes on the firmware as low as possible and we have documented here:
+[* 9] We highly recommend to now flash back the stock Prusa firmware. The custom firmware is only needed for (XY)Z Calibration and Selftest, all other features of the original firmware are working normally. If you like you can continue to use our custom firmware at your own risk.
[* 1] Select and download the latest Prusa firmware here: [https://www.prusa3d.com/drivers/|prusa3d.com/drivers] :
[* 1] ***MK3S Einsy-Rambo 10a*** firmware name example: ''FW_MK3S-EINSy10a.hex''
[* 1] ***MK2.5S Mini-Rambo 13a*** firmware name example: ''FW_MK25S-RAMBo13a.zip''
[* 1] ***MK2.5SMini-Rambo 10a*** firmware name example: ''FW_MK25S-RAMBo10a.zip''
[* 10] MK2.5S firmware comes as a ZIP files containing several languages of the firmware. Extract the ZIP file and choose the language you prefer the most.
[* 10] If you don't know which Mini-Rambo board you have, please refer to [https://www.prusa3d.com/downloads/firmware/EN-how-to-choose-firmware-MK25.pdf|this document]