Changes to Step #9
Edit by NATHAN M. DENKIN —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Connect your printer | |
| [* 3] Get a USB A to B cable. | |
| [* 5] Connect the USB cable on the Mini-Rambo / Einsy-Rambo. | |
| - | [* 1] Connect the other side of the USB cable to your computer that is running PrusaSlicer (Slic3r PE). |
| + | [* 1] Connect the other side of the USB cable to your computer that is running PrusaSlicer. |
| + | [* 10] We recommend that you use PrusaSlicer to flash firmware. |
| [* 1] Turn on the printer. |