Changes to Step #5
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Disassembly |
|---|---|
| + | [* 1] 1. Unload the filament and allow the hot end to cool. Turn off the printer and remove the power plug. |
| + | [* 1] 2. Protect the printing surface and use a tray to catch small components that might fall during the disassembly. |
| + | [* 1] 3. Remove the m3x40 screw securing the Rambo/Einsy cover and disconnect all connectors from the extruder cable. |
| + | [* 1] 4. Cut the zip ties and remove the screws clampling the extruder cable and remove the 3mm nylon filament. Completely unwind the cables. |
| + | [* 9] Be careful to not cut the cables while cutting the zip ties. |