Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Checking PTFE tube length |
|---|---|
| + | [* 9] The Bear extruder is using a different PTFE tube length than MK2.5S and MK3S. The Bear extruder use the same PTFE tube length than MK2S, MK2.5 (non-S) and MK3 (non-S). |
| + | [* 1] If you are coming from MK2.5S or MK3S, the assembly will guide you through the steps of preparing the PTFE tube. |
| + | [* 1] In case you need to prepare a new PTFE tube, make sure you have the following parts: |
| + | [* 8] Ptfe cutter jig (included in the printed parts). |
| + | [* 7] Box cutter with a lame thickness of 0.4mm. |
| + | [* 5] 60° countersink. |
| + | [* 4] Unused PTFE tube of at least 100mm. |
| + | [* 10] Bear extruder PTFE tube must be 50mm. |
Image 1
No previous image
Added
Image 2
No previous image
Added