Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Min Temp Error for Hotend (1/2) | |
| [* 1] Turn the printer off and and then on. | |
| [* 1] Preheat the heated bed and extruder for PLA temperature through the Preheat menu of your printer. | |
| [* 1] Unplug the hotend thermistor wires. | |
| - | [* 3] Rambo Mini hotend thermistor connector. |
| - | [* 5] Rambo Einsy hotend thermistor connector. |
| + | [* 3] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). |
| + | [* 5] Rambo Einsy hotend thermistor connector (MK3 and MK3S). |