Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier


Step Lines

[title] Min Temp Error for Hotend (1/2)
-[* black] Turn the printer off and and then on.
+[* black] Turn the printer off and then on.
[* black] Preheat the heated bed and extruder for PLA temperature through the Preheat menu of your printer.
[* black] Unplug the hotend thermistor wires.
[* orange] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* green] Rambo Einsy hotend thermistor connector (MK3 and MK3S).