Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Hotend (1/2)
[* black] Turn the printer off and then on.
[* yellow] Preheat the heated bed and extruder for PLA temperature through the ''preheat'' menu of your printer.
-[* black] Unplug the hotend thermistor wires.
+[* black] Unplug the hotend thermistor wires:
[* orange] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* green] Rambo Einsy hotend thermistor connector (MK3 and MK3S).