Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by 3D_Gussner

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Hotend (1/2)
-[* black] Turn the printer off and then on.
-[* yellow] Preheat the heated bed and extruder for PLA temperature through the ''preheat'' menu of your printer.
+[* black] Turn the printer off.
+[* yellow] Preheat the heated bed and extruder to PLA temperature through the ''Preheat'' menu of your printer. You also can set just the temperature of the nozzle to 205°C in the "Settings/Temperature menu.
[* black] Unplug the hotend thermistor wires:
[* orange] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* green] Rambo Einsy hotend thermistor connector (MK3 and MK3S).
+[* black] Turn the printer on.