Changes to Step #3

Edit by 3D_Gussner —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Hotend (1/2)
[* 1] Turn the printer off and on.
-[* 4] Preheat the heated bed and extruder to PLA temperature through the ''Preheat'' menu of your printer. You also can set just the temperature of the nozzle to 215°C in the "Settings/Temperature" menu.
+[* 4] Preheat the heated bed and extruder to PLA temperature through the ''Preheat'' menu of your printer. You also can set just the temperature of the nozzle to 215°C in the ''Settings/Temperature'' menu.
[* 1] Unplug the hotend thermistor wires:
[* 3] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* 5] Rambo Einsy hotend thermistor connector (MK3 and MK3S).