Changes to Step #3
Edit by 3D_Gussner —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Min Temp Error for Hotend (1/2) | |
| [* black] Turn the printer off and on. | |
| [* yellow] Preheat the heated bed and extruder to PLA temperature through the ''Preheat'' menu of your printer. You also can set just the temperature of the nozzle to 215°C in the ''Settings/Temperature'' menu. | |
| - | [* black] Unplug the hotend thermistor wires: |
| + | [* black] Unplug the ***hotend thermistor*** wires: |
| [* orange] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* green] Rambo Einsy hotend thermistor connector (MK3 and MK3S). |