Changes to Step #4
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* red] After few seconds you must have the ***err MIN TEMP*** message displaying on the printer. |
|---|---|
| + | [* light_blue] The targeted temperatures should be set to ***0°C*** |
| + | [* black] Quickly plug back the hotend thermistor. |
| + | [* black] Let the hotend cool down under 50°C. |
| + | [* black] Turn the printer off. |
| + | [* icon_caution] If this behave differently please verify your connection and firmware. If it continues ask for help. |
Image 1
No previous image
Added