Changes to Step #4
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Min Temp Error for Hotend (2/2) |
|---|---|
| [* 2] After few seconds you must have the ***err MIN TEMP*** message displaying on the printer. | |
| [* 6] The targeted temperatures should be set to ***0°C*** | |
| [* 1] Quickly plug back the hotend thermistor. | |
| [* 1] Let the hotend cool down under 50°C. | |
| [* 1] Turn the printer off. | |
| - | [* 9] If this behave differently please verify your connection and firmware. If it continues ask for help. |
| + | [* 9] If this behave differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help. |