Bear Lab
/
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Hotend (2/2)
[* red] After few seconds you must have the ***err MINTEMP*** error message displayed on the printer.
-[* light_blue] The targeted temperatures should be set to ***0°C***.
+[* light_blue] The targeted temperatures must be set to ***0°C***.
[* black] Quickly plug back the hotend thermistor.
[* black] Let the hotend cool down under 50°C.
[* black] Turn the printer off.
[* icon_caution] If this behave differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.