Changes to Step #4

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Hotend (2/2)
-[* 2] After few seconds you must have the ***err MINTEMP*** error message displayed on the printer.
+[* 2] After few seconds you must have the ***Err: MINTEMP*** error message displayed on the printer.
[* 6] The targeted temperatures must be set to ***0°C***.
[* 1] Quickly plug back the hotend thermistor.
[* 1] Let the hotend cool down under 50°C.
[* 1] Turn the printer off.
[* 9] If this behave differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.