Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by 3D_Gussner

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Hotend (2/2)
[* red] After few seconds you should get the ***Err: MINTEMP*** error message displayed on the printer.
[* light_blue] Set targeted temperatures back to ***0°C*** via ''Preheat/Cooldown'' or ''Settings/Temperature'' menu.
[* black] Quickly plug back the ***hotend thermistor*** and let the hotend cool down under 50°C.
-[* black] Turn the printer off after Hotend and Bed are cooled down. Turning off the printer while the Hotend is ***above*** 50°C can cause heat creep!
+[* green] Turn the printer off after Hotend and Bed are cooled down. Turning off the printer while the Hotend is ***above*** 50°C can cause heat creep!
[* icon_caution] If this step behaves differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.