Changes to Step #5
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Min Temp Error for Bed (1/2) |
|---|---|
| + | [* 1] Turn the printer off and and then on. |
| + | [* 1] Preheat the heated bed and extruder for PLA temperature through the Preheat menu of your printer. |
| + | [* 1] Unplug the bed thermistor wires. |
| + | [* 3] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). |
| + | [* 5] Rambo Einsy hotend thermistor connector (MK3 and MK3S). |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added