Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier


Step Lines

[title] Min Temp Error for Heated Bed (1/2)
[* black] Turn the printer off and then on.
[* yellow] Preheat the heated bed and extruder for PLA temperature through the ''Preheat'' menu of your printer.
-[* black] Unplug the ***heated bed*** thermistor wires:
+[* black] Unplug the ***heated bed thermistor*** wires:
[* orange] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
[* green] Rambo Einsy heated bed thermistor connector (MK3 and MK3S).