Changes to Step #5

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Heated Bed (1/2)
[* 1] Turn the printer off and and then on.
[* 1] Preheat the heated bed and extruder for PLA temperature through the Preheat menu of your printer.
[* 1] Unplug the heated bed thermistor wires.
- [* 3] Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
- [* 5] Rambo Einsy hotend thermistor connector (MK3 and MK3S).
+ [* 3] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
+ [* 5] Rambo Einsy heated bed thermistor connector (MK3 and MK3S).