Changes to Step #5
Edit by 3D_Gussner —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Min Temp Error for Heated Bed (1/2) | |
| [* 1] Turn the printer off and then on. | |
| - | [* 4] Preheat the heated bed and extruder for PLA temperature through the ''Preheat'' menu of your printer. You also can set just the temperature of the bed to °C in the ''Settings/Temperature'' menu. |
| + | [* 4] Preheat the heated bed and extruder for PLA temperature through the ''Preheat'' menu of your printer. You also can set just the temperature of the bed to 60°C in the ''Settings/Temperature'' menu. |
| [* 1] Unplug the ***heated bed*** thermistor wires: | |
| [* 3] Rambo Mini heated bed thermistor connector (MK2, MK2S, MK2.5 and MK2.5S). | |
| [* 5] Rambo Einsy heated bed thermistor connector (MK3 and MK3S). |