Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Heated Bed (2/2)
[* 2] After few seconds (it is a bit longer for the bed) you must have the ***err MINTEMP BED*** error message displayed on the printer.
-[* 6] The targeted temperatures should be set to ***0°C***.
+[* 6] The targeted temperatures must be set to ***0°C***.
[* 1] Quickly plug back the heated bed thermistor.
[* 1] Let the hotend cool down under 50°C.
[* 1] Turn the printer off.
[* 9] If this behave differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.