Bear Lab
/
/

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by 3D_Gussner —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Min Temp Error for Heated Bed (2/2)
[* red] After few seconds (it is a bit longer for the bed) you must have the ***Err: MINTEMP BED*** error message displayed on the printer.
-[* light_blue] The targeted temperatures must be set to ***0°C***.
-[* black] Quickly plug back the heated bed thermistor and let the hotend cool down under 50°C.
+[* light_blue] Set targeted temperatures back to ***0°C*** via ''Preheat/Cooldown'' or ''Settings/Temperature'' menu.
+[* black] Quickly plug back the ***heated bed thermistor*** and let the hotend cool down to at lease ***50°C***.
[* black] Turn the printer off.
[* icon_caution] If this step behaves differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.