Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Grégoire Saunier

Edit approved by Grégoire Saunier


Step Lines

+[title] Preparing a cable to test thermal runaway
+[* icon_note] To test runaway protection (or MAX TEMP protection) you need to shortcut the thermistor pins. The best way is to build a little jumper connector.
+[* black] Rambo Einsy and Mini are both using 2 pins Molex 50-57-9402 connector (with Molex 16-02-0097 pins).
+[* black] Alternatively you can cut an old thermistor and connect both wires together.